This three part screencast will walk you through a MythTV install using MythDora, an "all-in-one" MythTV linux distribution. As MythDora installs MythTV and Linux, it will format your hard drive, install all the MythTV components, and walk you through the configuration of the critical components. If you are new to MythTV and have a spare machine to install on, MythDora is an excellent way to try MythTV for the first time.

I've been running a beta release of the new CommandIR 2 for a little while now.  This is a device developed specifically for the Linux and MythTV market by Innovation One located in Ontario Canada. 

Innovation One provided MythPVR.com with a pre-release unit to beta test and review.

I evaluated the unit using MythDora (4.0) on my low power Via EPIA MythTV server.

For testing IR Remote functionality I used a StreamZap remote control and blasted IR signals at a Zenith DTT-900 Digital to Analog Converter set-top box and Toshiba TV.

The CommandIR 2 is a few things in one specialized USB hardware device:

1.  Four IR blasters, which can be independently controlled
2.  One on-board IR receiver
3.  One wired IR receiver (optional)
4.  Six software controllable LEDs

Analog Broadcast TV will soon be going away.

Even if you're not concerned about that yet, the upgrade to better (perfect!) picture quality and addition channels is well worth the upgrade.

In my case, the end result was going from 3 watchable over the air channels to 12, which all now have perfect picture and audio quality.

After much research, I decided to use my first of two government coupons on a Zenith DTT900 to use with MythTV.

All the Digital Converter Boxes on the market have some type of problem(s), but the Zenith seemed like the best of the bunch. Based on my usage over the past month, I am very happy with the decision and would recommend this device to anyone.

Here's how to get the Zenith DTT900 working with MythTV using a Serial IR Blaster.

How much power does a home server suck out of the wall each year? My old media server used 80 watts. Last year I put together a silent MythTV Frontend (set-top box.) It only uses about 18 watts of power. What if a full fledged MythTV server were built on the same platform?

• How much power could be saved?
• Would the performance be acceptable?
• How much money would it save in energy bills?

Motivated by my fairly new Kill-a-Watt power meter, I set out to build the system to answer these questions and see if the results would be a system I would want to stick with.

KnoppMyth is one of the easy ways to get started with MythTV. It's is really two products bundled into one.

KnoppMyth is:

1. An easy way to install MythTV and Linux onto a system
2. A bootable CD that can run a MythTV Frontend without needing to install anything onto the computer

View a screencast of the KnoppMyth Install process.

While looking for a good remote control for my Silent MythTV Frontend I stumbled upon the StreamZap IR Remote Control, and decided to give it a try.

The StreamZap PC Remote Control sells for around $30, which includes a USB receiver. That puts the StreamZap is near the bottom of the price spectrum once you factor in the IR Receiver.

I've been using it for a couple months now, have mentioned it a few times on the MythTV mailing list, and figured it's about time I wrote a review.